Quality led street light wholesale manufacturer: IK stands for Impact-Kinetic. Similar to ingress protection, impact protection, or the IK rating, also tells a big story in a number. If an LED roadway light manufacturer mentions an IK09 rating in its product specs, the product has an impact resistance of 10 joules. It is equivalent to a 5-kg object dropping from 20cm in height. A typical roadway lighting LED consists of aluminum as the base material and acts as a heatsink. However, thermal pastes and pads play a vital role in ensuring the heat is conducted from the LED chip to the case and the driver and adequately dissipated to the environment. High-end street lights use high-quality and adequate quantities of thermal paste and padding underneath the substrate or PCB to ensure proper heat transfer. Similarly, the driver is also thermally bonded with the casing through adhesives, pads, and thermal pastes. There are a couple of things to look for in an LED roadway light: the body should be made of high-conductivity material, the design may include a fin-like structure outside, and all the heat-generating components should be heatsinked appropriately. Read extra details at led flood light manufacturers.
Using aluminum provides lightweight, corrosion-resistant, versatile, heat-conductive, and recyclable designs for LED roadway light cases. A high-end LED roadway light will have a UV and water-resistive coating to improve longevity. The street light pole mount can be 60-76mm in diameter. The street light LED assembly must clamp onto the pole firmly. Manufacturers produce yoke, side entry, shoe, top entry, and suspended mounting mechanisms. These can be either aluminum or iron, depending on the design. In the case of iron, the mount can catch rust in high humidity and UV conditions. Aluminum is still the preferred mounting material for LED streetlights.
The global market for outdoor lighting is expected to surpass USD 14.44 billion by 2030, and floodlights have played a significant role in this growth. These lights have applications ranging from sports venues to security fences, street lighting, and backyard lighting. Ever since their first use in the 1928 Summer Olympics in Amsterdam, a major sporting event, floodlights have been a staple of sports arenas and venues. The manufacturers of modern floodlighting systems address the initial problems entirely, such as non-focused or overbright lighting. They use LED lighting elements for enhanced spread and power-efficient lighting setup. This article will cover every aspect one needs to know about flood lights, including their purpose, types, and a quick buying guide.
Industry Lighting is made of super bright LED white light as the light source, the shell is made of aluminum alloy (customer optional), the outer cover is made of high efficiency lens (customer optional), heat dissipation is made of copper sheet heat conduction and aluminum alloy strip heat dissipation natural air circulation The heat dissipation is more perfect, and the shape of the LED will be changed continuously according to the different needs of the customers.
Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.
LED garden lights are a kind of outdoor lighting. It uses a new type of LED semiconductor as the illuminant. It usually refers to the outdoor lighting that illuminates an area less than 6 square meters. Its main components include an LED light source, enclosure, pole, and flange. The disc and the basic embedded parts are composed of 5 parts. It is mainly used to light up large-area mines, building outlines, stadiums, overpasses, monuments, parks, and flower beds. In fact, almost all large-area lighting fixtures used outdoors can be regarded as spotlights. Applicable occasions: Suitable for shopping malls, exhibition halls, parking lots, playgrounds, gyms, parks, building facade and public corridor, stair corridor and other indoor and outdoor lighting.
The solar road lighting is powered by a crystalline silicon solar cell. The maintenance-free valve-regulated sealed battery (colloidal battery) Sealed Lead Acid is exceptional in storing energy. The super bright LED lamp is used as a light source and is controlled by an intelligent charge and discharge controller, replacing the traditional utility electric lighting. Outdoor solar street lamp is to convert sunlight collected during the day into electric energy for storage, and then use the stored electric energy as LED lighting at night. Read more information at https://www.chz-lighting.com/.
The following are some of the specifications used to differentiate street lights from other sources of light. Operating Temperature: This refers to the optimal temperature at which these lights operate. This specification is key to all outdoor lamps. The lamps are usually helpful at night. Therefore, on average, these lamps operate at a low temperature of up to 2 degrees Celsius. The manufacturers have significantly factored in the fact that the lights can be installed in areas that experience winter seasons each year. The modular LED street light uses a die-cast aluminum shell, which has strong heat dissipation capacity and greatly improves the heat dissipation efficiency. In addition, the LED lamp beads inside the luminaire are separated and dispersed, which reduces the heat accumulation inside the luminaire and is more conducive to heat dissipation. LED street lights have good heat dissipation and natural long service life.
CHZ Lighting focuses on LED outdoor lighting and high-power indoor lighting. The company has always adhered to the high standards of “leading technology and leading quality”, constantly developing new products, leading the trend of intelligence, insisting on the use of high-quality raw materials and advanced production technology, and focusing on the manufacture of each lamp. The main products have passed TUV, ENEC, CB, ROHS, UL, DLC, CE, SAA, and other international standards certification.
The indoor table tennis room originally used 36 1000W lighting light boxes, the glare was serious and unevenly distributed, and the field illumination was less than 100lx, which was not conducive to the development of table tennis. In order to ensure the professionalism of table tennis lighting,CHZ-LIGHTING uses 124 36W professional anti-glare LED panel lights, which are made of special water chestnut plates, UGR<19, and are reasonably arranged above the venue. After testing, the average illuminance of the venue is above 300lx, the uniformity is above 0.6, the light is soft and bright, and there is no glare interference. The healthy eye-protecting light makes the eyes more comfortable.