Brass cable glands and PG cable glands buyer tips? The areas of application of cableglandsonline.com EMC fittings range from machine and plant construction applications to telecommunications and airports up to use in hybrid vehicles – to name only a few. In the automotive sector, they are primarily used in hybrid and electric vehicles, but also in conventional vehicles to protect the sensor and on-board electronics systems from electromagnetic interference.
Cable glands are bulkhead modules that allow barrier penetration while providing sealing protection. They are commonly known as sealing glands or strain reliefs and have the ability to seal around one or multiple wires, cables, or probes. Cable glands are sometimes configurable to work with any cable within a specified size range. They serve several functions including environmental protection (such as protection against dust and moisture) and additional sealing on the part of the cable entering the enclosure.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Railway glands : Designed for use on trains and associated installations. Read extra info on PG Threaded Cable Gland.
The CMP E1FX/M cable gland is suitable for use with all forms of equipment protection permitted in Zone 1 provided always that the prevailing code of practice, installation and maintenance is observed ie. IEC60079-14. Locate the cable gland Armour Cone ensuring the correct side of the cone is outermost – grooved for braid/tape armour and stepped for SWA cables. Pass the cable through the cable gland until the wire armour is engaged with the cone. Spread the wire armour evenly around the cone.
Selecting Cable Glands – Items to consider when selecting a cable gland for a particular installation include: Degree of Ingress Protection required. See our page on IP ratings. Certification of gland for use in Hazardous areas. Normal or barrier gland required.
CableGlandsOnline.com offer a wide selection of cable glands and cable ties to fit your needs. All of our cable glands meet IP68 specifications as liquid tight and are resistant to low level acides and alkalis. These cable glands are also designed for install well. Here are you can find a full sizes of all kinds of cable glands. Whether your application requires metric, npt or pg or other applications. You will find what you need here. Source: this website.