Amazing Aero Precision AR 15 lower parts? In 1956, designer Eugene Stoner presented his Armalite Model 10 design to the United States military as a possible replacement for the famous M1 Garand. Eugene Stoner was well known for being quite the designer and engineer, but will forever be known for his designs that led to the infamous AR 15. The United States Army was, at the time, searching for a new service rifle that could be chambered in 7.62 NATO which had been adopted only two years earlier. While Stoner’s AR 10 design was not eventually adopted, it did not go unnoticed and was considered by some other nations, such as Spain, and some commercial variants were eventually made. Instead of the AR 10 design, the United States military instead went with the Springfield M14. At the time, they felt this rifle was superior for many reasons, such as reliability, a proven track record on the design, and build quality. Unfortunately, this gun was heavy and many argued that more and more modern firefight engagements were being fought much closer than the 600 or more yards that the 7.62 NATO was originally intended for.
The main purpose of having a mounting system on your handguard is so that you can mount accessories on your firearm. What accessories are those and what should you install? There are plenty of different options on the market today for a wide variety of accessories, such as lights, lasers, infrared, grips, and bipods. In addition to the gas system and barrel lengths, consider the length of your handguard for accuracy. In addition to weight, the length of a handguard can affect overall accuracy. By selecting the right handguard, you can tighten up your shooting groups and at the same time reduce weight, provide better grip placement, and give you a wider variety of accessory mounting. One of the most popular accessories for any AR 15 is some sort of flashlight or weapon light. This can provide a shooter with many benefits, including being able to shoot in low light situations. It can also allow you to better identify your target before you take a shot. In terms of home defense, a bright light could also be used to temporarily blind your attacker or target, in addition to providing all of the other benefits.
Cut rifled barrels have long been considered the standard for the AR 15. It is by far the most popular and still to this day one of the most cost-effective ways to create barrels. A cut rifled barrel is created just like the name says: a barrel blank is inserted into a rifling machine, which resembles a large lathe. The machine then pushes a single cutter attached to a long rod through the rough rifle bore, carving out each groove of the rifling. This entire process can be very time consuming, but given the right technique and equipment, produces the most accurate AR 15 barrels that you can find. See even more details at AR 15 Parts.
10.5” 5.56 NATO Pistol Upper Assembly: If you’re still liking the idea of an AR pistol build but don’t like the idea of a super short 7.5” barrel, an obvious solution is the 10.5” 5.56 NATO Pistol Upper Assembly. This is a length where, ballistically, with the right ammo, it could make for a very mean little defensive AR pistol. You’re only adding 3” to the gun, but that length addition, in our opinion, bumps it out of ‘range toy’ category and into an area where you could seriously consider this as a trunk or behind-the-nightstand pistol, depending on your needs. Our 10.5” 5.56 NATO Pistol Upper Assembly has the same features as the 7.5″ 5.56 NATO Pistol Upper Assembly, and paired with one of our bolts, you have a very handy, reliable and practical AR 15 pistol. One caveat: Even at 10.5”, these upper assemblies are still loud. As long as you know what to expect going in…carry on.
Handguards come in plenty of different shapes and sizes, regardless of what material they are made of. While there are plenty of designs, there are two main handguard designs that you will see the most often on the majority of AR 15’s today, and these two offer the most options when selecting a handguard for your AR 15. There are plenty of different handguard designs out on the market today, but one of the main design categories that most handguards will fall into are called drop-in handguards. These are the most popular handguards that you will see on most AR-15’s, and for good reason. They are super easy for anyone to install themselves, and are usually made of lightweight polymer. Black Rifle Depot is a family owned and operated AR 15 Parts and AR 15 Accessories wholesale distributor based out of Bakersfield California. We offer a large variety of AR 15 Parts such as AR 15 Complete Uppers, AR 15 Barrels, AR 15 Bolt Carriers, AR 15 Handguards and AR 15 Lower Build Kits to customize your AR 15 Rifle from some of the top manufactures in the industry such as Aero Precision, Anderson Manufacturing, Faxon, Magpul Industries, and Odin works. With our continuous growing inventory and competitive prices, make Black Rifle Depot your one stop shop for AR 15 Parts and AR 15 Complete Uppers. Discover more info at https://blackrifledepot.com/.